Connect T
This product (hardware) has been discontinued and is therefore at the end of its product cycle (EoL).
Manual
The instruction manual in PDF format can be downloaded HERE.
Interfaces and controls
The overview of the interfaces and controls in PDF format can be downloaded HERE.
LED States
| Power-Status-LED | |
|---|---|
|
Starting up |
|
Normal operation |
|
Configuration mode active |
| Uplink-Status-LED | |
|
Switched off |
|
|
Initialization |
|
Connected in standby mode |
|
|
Connected |
| Status-LED | |
|
|
Normal operation |
|
No connection to the Internet |
|
Cannot obtain an IP address |
|
Standard gateway not accessible |
|
DNS server not accessible |
|
No connection to HOOC Cloud |
Device configuration
Configuration mode
By default, the device obtains an IP address via DHCP. In addition, the HOOC gateway is configured with a static IP address 172.17.17.17.
Follow the instructions below to connect your computer to the HOOC gateway:
- Connect the HOOC gateway to the power supply.
- Wait until the device has started (approx. 1min).
- Connect your computer to the network port of the gateway, or to the switch to which the gateway is connected to.
- Set the network adapter’s IP address to 172.17.17.16 and the subnet mask to 255.255.255.0
- Open the URL 172.17.17.17 in your browser (preferably Google Chrome).
There are two ways to start the configuration mode:
| Activation method | Instructions |
|---|---|
| local | Press the reset button on the device briefly (1sec). |
| from remote | The activation code to start the configuration mode can be generated remotely using the HOOC ClientApp. In the menu Secure Remote Access the action Open configuration page can be activated. Afterwards, the activation code can be copied and used on the device status page. |
If there are problems with the configuration, the HOOC gateway can be reset to the factory settings. After switching on the device, the factory settings can be restored by pressing the reset button for 15 seconds.
ConnectOS
EoS Information
| ConnectOS | LED states |
|---|---|
| ConnectOS v1 | Interfaces and controls |