zevvy
How to set up zevvy
Zevvy is the platform for energy and utility costs. Zevvy bills heating costs, solar electricity (ZEV), water and many other ancillary costs for one or more properties. Using the interface provided by HOOC, metering data is automatically transmitted from the site to zevvy. By clicking on the icon, a new interface to zevvy can be set up.
| Property | Description |
|---|---|
| Protocol type | Select zevvy |
| Name | Enter the name of the device |
| Description | Enter the description of the device |
Connect to zevvy
After an interface to zevvy has been set up, the appropriate access permissions must be granted.
Actions
After a zevvy interface has been set up, various actions can be performed.
| Action | Description |
|---|---|
| Edit interface settings | |
| Export data points (if data points are available) | |
| Import data points (if no data points are available) | |
| Connect to zevvy (If connection to zevvy failed) | |
| Remove interface (if no data points are recorded) |
Setup data points
By clicking on the icon, a new data point will be created for the corresponding interface.
| Property | Description |
|---|---|
| zevvy device | Enter the name of the device to be shown in the zevvy portal |
| zevvy data point | Enter the name of the measurement to be shown in the zevvy portal |
| Data point | Enter the name of the data point |
| Description | Enter the description of the data point |
| Unit | If desired, specify the units in the LaTeX format (e.g. ^\circ C for °C) Note: The unit does not effect zevvy |
Actions
The setup of the data point allows a number of possible actions.
| Action | Description |
|---|---|
| Edit data point settings | |
| Edit Smart UI settings | |
| Show data point trend | |
| Write data point | |
| Duplicate data point | |
| Remove data point |
Further information
By means of the data point mapping functionality, values can now be read from other interfaces/end devices and transmitted to zevvy.
The minimum transmission interval for the data point mappings is 60 seconds. Values that are written via the HOOC portal are transmitted immediately to zevvy.