By clicking on the icon, a new device can be entered.
Property | Description |
---|---|
Protocol type | Select KNX |
Name | Enter the name of the device |
Description | Enter the description of the device |
Connection type | Select IP Routing (KNX router) or IP tunneling (KNX gateway) |
IP Address | Enter the IP address of the device as it is/will be assigned in the remote network |
Port | Accept “Port 3671” (default) or adjust port |
TLS connection | The connection to the end device is encrypted (only with IP tunneling) / KNX Secure is not supported |
Use KNX Secure | Communication via IP tunnel takes place via KNX Secure |
KNX Secure Channel | Select tunneling interface of the KNX Secure system device |
Keyring | Keyring exported from ETS secured with specified password. The device certificates are not required. |
Timeout | Enter communication timeout (1000ms recommended) |
Connection monitoring | If this field is checked, all data points will be marked as invalid in case the connection is interrupted (Last known value) |
Validity period | If in the predefined interval no value update is received, the corresponding data point will be marked as invalid (Last known value) |
If you want to write to ‘Secure group addresses’ (KNX Data Secure) with KNX Secure, the corresponding links of the group addresses to the tunneling interface used must be configured in the ETS.
For KNX devices, the bus load of the last minute is displayed.
The setup of the KNX device allows a number of possible actions.
Action | Description |
---|---|
Edit end device settings | |
Export data points (if data points are available) | |
Import data points (if no data points are available) | |
Execute Ping on KNX device (only for KNX IP tunneling) | |
Show KNX group monitor | |
Show logs of KNX group addresses | |
Remove device (if no data points are recorded) |
For KNX devices, data points can be imported directly from ETS5. For this purpose, check on the data types supported by HOOC. The group addresses are to be exported according to the default settings (XML file). After the export, the data points can be imported with action .
The logged KNX telegrams on the group addresses can also be directly exported as XML (see popup ). These data can be imported in the ETS5 for further purposes.
The live values of the acquired data points are automatically displayed. By clicking on the icon, you can stop the data monitor.
By clicking on the icon, a new data point will be created for the corresponding interface.
Property | Description |
---|---|
KNX Group address | Enter the KNX group address (0/0/0 to 15/15/255) |
Writeable | When activated, values can be written to this group address |
Data point | Enter the name of the data point |
Description | Enter the description of the data point |
Data type | Select the KNX data type |
The setup of the data point allows a number of possible actions.
Action | Description |
---|---|
Edit data point settings | |
Edit Smart UI settings | |
Show data point trend | |
Write data point (if writeable) | |
Duplicate data point | |
Remove data point |
DPT_ID | DPT_Name |
---|---|
1.001 | DPT_Switch |
1.002 | DPT_Bool |
1.003 | DPT_Enable |
1.004 | DPT_Ramp |
1.005 | DPT_Alarm |
1.006 | DPT_BinaryValue |
1.007 | DPT_Step |
1.008 | DPT_UpDown |
1.009 | DPT_OpenClose |
1.010 | DPT_Start |
1.011 | DPT_State |
1.012 | DPT_Invert |
1.013 | DPT_DimSendStyle |
1.014 | DPT_InputSource |
1.015 | DPT_Reset |
1.016 | DPT_Ack |
1.017 | DPT_Trigger |
1.018 | DPT_Occupancy |
1.019 | DPT_Window_Door |
1.021 | DPT_LogicalFunction |
1.022 | DPT_Scene_AB |
1.023 | DPT_ShutterBlinds_Mode |
1.100 | DPT_Heat/Cool |
4.001 | DPT_Char_ASCII |
4.002 | DPT_Char_8859_1 |
5.001 | DPT_Scaling |
5.003 | DPT_Angle |
5.004 | DPT_Percent_U8 |
5.005 | DPT_DecimalFactor |
5.006 | DPT_Tariff |
5.010 | DPT_Value_1_Ucount |
6.001 | DPT_Percent_V8 |
6.010 | DPT_Value_1_Count |
7.001 | DPT_Value_2_Ucount |
7.002 | DPT_TimePeriodMsec |
7.003 | DPT_TimePeriod10MSec |
7.004 | DPT_TimePeriod100MSec |
7.005 | DPT_TimePeriodSec |
7.006 | DPT_TimePeriodMin |
7.007 | DPT_TimePeriodHrs |
7.010 | DPT_PropDataType |
7.011 | DPT_Length_mm |
7.012 | DPT_UElCurrentmA |
7.013 | DPT_Brightness |
8.001 | DPT_Value_2_Count |
8.002 | DPT_DeltaTimeMsec |
8.003 | DPT_DeltaTime10MSec |
8.004 | DPT_DeltaTime100MSec |
8.005 | DPT_DeltaTimeSec |
8.006 | DPT_DeltaTimeMin |
8.007 | DPT_DeltaTimeHrs |
8.010 | DPT_Percent_V16 |
8.011 | DPT_Rotation_Angle |
9.001 | DPT_Value_Temp |
9.002 | DPT_Value_Tempd |
9.003 | DPT_Value_Tempa |
9.004 | DPT_Value_Lux |
9.005 | DPT_Value_Wsp |
9.006 | DPT_Value_Pres |
9.007 | DPT_Value_Humidity |
9.008 | DPT_Value_AirQuality |
9.009 | DPT_Value_AirFlow |
9.010 | DPT_Value_Time1 |
9.011 | DPT_Value_Time2 |
9.020 | DPT_Value_Volt |
9.021 | DPT_Value_Curr |
9.022 | DPT_PowerDensity |
9.023 | DPT_KelvinPerPercent |
9.024 | DPT_Power |
9.025 | DPT_Value_Volume_Flow |
9.026 | DPT_Rain_Amount |
9.027 | DPT_Value_Temp_F |
9.028 | DPT_Value_Wsp_kmh |
10.001 | DPT_TimeOfDay |
11.001 | DPT_Date |
12.001 | DPT_Value_4_Ucount |
13.001 | DPT_Value_4_Count |
13.010 | DPT_ActiveEnergy |
13.011 | DPT_ApparantEnergy |
13.012 | DPT_ReactiveEnergy |
13.013 | DPT_ActiveEnergy_kWh |
13.014 | DPT_ApparantEnergy_kVAh |
13.015 | DPT_ReactiveEnergy_kVARh |
13.100 | DPT_LongDeltaTimeSec |
14.000 | DPT_Value_Acceleration |
14.001 | DPT_Value_Acceleration_Angular |
14.002 | DPT_Value_Activation_Energy |
14.003 | DPT_Value_Activity |
14.004 | DPT_Value_Mol |
14.005 | DPT_Value_Amplitude |
14.006 | DPT_Value_AngleRad |
14.007 | DPT_Value_AngleDeg |
14.008 | DPT_Value_Angular_Momentum |
14.009 | DPT_Value_Angular_Velocity |
14.010 | DPT_Value_Area |
14.011 | DPT_Value_Capacitance |
14.012 | DPT_Value_Charge_DensitySurface |
14.013 | DPT_Value_Charge_DensityVolume |
14.014 | DPT_Value_Compressibility |
14.015 | DPT_Value_Conductance |
14.016 | DPT_Value_Electrical_Conductivity |
14.017 | DPT_Value_Density |
14.018 | DPT_Value_Electric_Charge |
14.019 | DPT_Value_Electric_Current |
14.020 | DPT_Value_Electric_CurrentDensity |
14.021 | DPT_Value_Electric_DipoleMoment |
14.022 | DPT_Value_Electric_Displacement |
14.023 | DPT_Value_Electric_FieldStrength |
14.024 | DPT_Value_Electric_Flux |
14.025 | DPT_Value_Electric_FluxDensity |
14.026 | DPT_Value_Electric_Polarization |
14.027 | DPT_Value_Electric_Potential |
14.028 | DPT_Value_Electric_PotentialDifference |
14.029 | DPT_Value_ElectromagneticMoment |
14.030 | DPT_Value_Electromotive_Force |
14.031 | DPT_Value_Energy |
14.032 | DPT_Value_Force |
14.033 | DPT_Value_Frequency |
14.034 | DPT_Value_Angular_Frequency |
14.035 | DPT_Value_Heat_Capacity |
14.036 | DPT_Value_Heat_FlowRate |
14.037 | DPT_Value_Heat_Quantity |
14.038 | DPT_Value_Impedance |
14.039 | DPT_Value_Length |
14.040 | DPT_Value_Light_Quantity |
14.041 | DPT_Value_Luminance |
14.042 | DPT_Value_Luminous_Flux |
14.043 | DPT_Value_Luminous_Intensity |
14.044 | DPT_Value_Magnetic_FieldStrength |
14.045 | DPT_Value_Magnetic_Flux |
14.046 | DPT_Value_Magnetic_FluxDensity |
14.047 | DPT_Value_Magnetic_Moment |
14.048 | DPT_Value_Magnetic_Polarization |
14.049 | DPT_Value_Magnetization |
14.050 | DPT_Value_MagnetomotiveForce |
14.051 | DPT_Value_Mass |
14.052 | DPT_Value_MassFlux |
14.053 | DPT_Value_Momentum |
14.054 | DPT_Value_Phase_AngleRad |
14.055 | DPT_Value_Phase_AngleDeg |
14.056 | DPT_Value_Power |
14.057 | DPT_Value_Power_Factor |
14.058 | DPT_Value_Pressure |
14.059 | DPT_Value_Reactance |
14.060 | DPT_Value_Resistance |
14.061 | DPT_Value_Resistivity |
14.062 | DPT_Value_SelfInductance |
14.063 | DPT_Value_SolidAngle |
14.064 | DPT_Value_Sound_Intensity |
14.065 | DPT_Value_Speed |
14.066 | DPT_Value_Stress |
14.067 | DPT_Value_Surface_Tension |
14.068 | DPT_Value_Common_Temperature |
14.069 | DPT_Value_Absolute_Temperature |
14.070 | DPT_Value_TemperatureDifference |
14.071 | DPT_Value_Thermal_Capacity |
14.072 | DPT_Value_Thermal_Conductivity |
14.073 | DPT_Value_ThermoelectricPower |
14.074 | DPT_Value_Time |
14.075 | DPT_Value_Torque |
14.076 | DPT_Value_Volume |
14.077 | DPT_Value_Volume_Flux |
14.078 | DPT_Value_Weight |
14.079 | DPT_Value_Work |
19.001 | DPT_DateTime |