End of Life (EOL)
The firmware functions listed below are no longer or only partially supported for compatibility reasons.
KNX
The media converter software (KNX-USB <-> KNX-IP) is no longer supported from ETS 6.
HOOC offers the possibility of converting data from a KNX USB interface into data from a KNX IP gateway or a KNX IP router. Thus, a KNX USB interface can also be used as a “terminal device” in the Secure Remote Control service via HOOC Connect. The following settings can be made:
| Setting | Description |
|---|---|
| KNX enabled | Enables and disables the KNX functionality |
| Interface name | Designates the interface (displayed in the ETS 5) |
| KNX address | Designates the KNX source address of the HOOC gateway |
| Client addresses | Designates the KNX start source address to be used for packets and number of parallel connections for (KNX IP tunneling) |
The source addresses 1.1.240 to 1.1.249 are used for the setting 1.1.240 and 10 of client addresses.
You can connect a commercially available KNX USB interface to USB port 1. The connection status of the KNX USB interface will be displayed directly including information about the manufacturer and the model. The list below gives you an overview of the supported and ETS 5 tested types.
| KNX USB Interface | USB Vendor ID | USB Product ID | tested (ETS 5) |
|---|---|---|---|
| Siemens KNX/EIB-USB Interface (Flush mounted) | 0e77 | 0111 | |
| Siemens KNX/EIB-USB Interface (DIN rail) | 0e77 | 0112 | |
| Siemens OCI700 Service Interface | 0681 | 0014 | |
| Merlin Gerin KNX-USB Interface (Flush mounted) | 0e77 | 0141 | |
| Hensel KNX-USB Interface (Rail mounted) | 0e77 | 0121 | |
| Busch-Jaeger KNX-USB Interface (Flush mounted) | 145C | 1330 | |
| Busch-Jaeger KNX-USB Interface (surface mounted) | 145C | 1490 | |
| ABB STOTZ-KONTAKT KNX-USB Interface (MDRC) | 147B | 5120 | |
| Feller KNX-USB Data Interface | 135E | 0026 | |
| JUNG KNX-USB Data Interface | 135E | 0023 | |
| Gira KNX-USB Data Interface | 135E | 0022 | |
| Berker KNX-USB Data Interface | 135E | 0021 | |
| Insta KNX-USB Data Interface | 135E | 0020 | |
| Weinzierl KNX-USB Interface (Flush mounted) | 0e77 | 0102 | |
| Weinzierl KNX-USB Interface (RS232) | 0e77 | 0103 | |
| Weinzierl KNX-USB Interface (Rail mounted) | 0e77 | 0104 | |
| Tapko USB Interface | 16D0 | 0490 | |
| Hager KNX-USB Data Interface | 135E | 0025 | |
| Preussen Automation USB2KNX | 16D0 | 0492 | |
| Merten KNX-USB Data Interface | 135E | 0024 | |
| b+b EIBWeiche USB | 04cc | 0301 | |
| MDT KNX_USB_Interface | 16D0 | 0491 | |
| Mean Well KSI-01U | 28c2 | 0013 | |
| Apricum KNX USB Interface UIM | 28c2 | 000f |